Showing 1–12 of 20 results
-

Victron’s USB‑RS485 Interface Cable enables a PC or monitoring device to communicate with Victron systems over RS485 (VE.Bus) by converting to a USB connection. This cable is commonly used for diagnostics, configuration, or integration with monitoring hardware and software when a direct USB interface is required. Available in 1.8m & 5m lengths
Login to see trade pricing and availability
-

Victron’s USB‑RS485 Interface Cable enables a PC or monitoring device to communicate with Victron systems over RS485 (VE.Bus) by converting to a USB connection. This cable is commonly used for diagnostics, configuration, or integration with monitoring hardware and software when a direct USB interface is required. Available in 1.8m & 5m lengths
Login to see trade pricing and availability
-

The Victron VE.Bus to USB MK3‑USB interface cable provides a wired data connection between Victron VE.Bus‑equipped inverter/chargers and a computer for configuration, monitoring, firmware updates, and diagnostics using VictronConnect or VE.Configure software. It’s essential for installers and technicians accessing advanced settings on VE.Bus products.
Login to see trade pricing and availability
-

This MK3‑USB‑C adaptor performs the same role as the standard MK3‑USB but uses a USB‑C connection for modern laptops and mobile devices, allowing installers to set up, configure, or update firmware on Victron VE.Bus devices without USB‑A ports.
Login to see trade pricing and availability
-

The VE.Bus Smart Dongle provides Bluetooth communication for Victron VE.Bus‑equipped inverter/chargers (Multi, MultiPlus, Quattro, etc.) via the VictronConnect App. It allows installers and end‑users to monitor key inverter/charger data, adjust certain settings (such as input current limits or operating mode), and view real‑time warnings and alarms from a mobile device.
Login to see trade pricing and availability
-

The Victron VE.Can to CAN‑bus BMS Type A Cable connects a CAN‑bus enabled battery or BMS (such as BYD Battery‑Box or other third‑party CAN‑bus batteries) to the VE.Can port of Victron monitoring/controllers (e.g., Cerbo GX). Type A is specifically wired for battery communication. Available in 1.8m & 5m lengths
Login to see trade pricing and availability
-

The Victron VE.Can to CAN‑bus BMS Type A Cable connects a CAN‑bus enabled battery or BMS (such as BYD Battery‑Box or other third‑party CAN‑bus batteries) to the VE.Can port of Victron monitoring/controllers (e.g., Cerbo GX). Type A is specifically wired for battery communication. Available in 1.8m & 5m lengths
Login to see trade pricing and availability
-

The Victron VE.Can to CAN‑bus BMS Type B Cable is an alternate CAN‑bus wiring configuration used for certain battery/BMS systems requiring a separate pinout (Type B). Connects battery/BMS to Victron VE.Can networks.
Login to see trade pricing and availability
-

The Victron VE.Direct to USB cable converts a VE.Direct communication port on Victron devices to a USB connection, allowing a computer to read, monitor, or configure devices such as SmartSolar/BlueSolar MPPT controllers, BMV battery monitors, and other VE.Direct‑enabled products.
Login to see trade pricing and availability
-

The VE.Direct to USB‑C interface cable adapts VE.Direct ports to USB‑C, supporting connection of VE.Direct enabled Victron devices to computers and controllers with USB‑C ports, facilitating setup, monitoring, and configuration.
Login to see trade pricing and availability
-

The Victron VE.Direct Bluetooth Smart Dongle adds wireless Bluetooth connectivity to Victron devices with a VE.Direct port. When paired with the VictronConnect App, it enables real‑time monitoring of battery status, solar charge data, and device performance on iOS/Android devices. It also provides Instant Readout of warnings, alarms, and key parameters without requiring a persistent paired…
Login to see trade pricing and availability
-

The Victron VE.Direct cable is a dedicated data communication cable used to connect Victron devices equipped with a VE.Direct port to one another or to system controllers. It enables real time data transfer, monitoring, and control between components such as charge controllers, battery monitors, and GX/VRM monitoring devices. They are typically used for connecting Victron…
Login to see trade pricing and availability